How to make an R2-D2 from scratch.
Anything In or Related to the Dome
This one is quite simple. Using a 1/2″ Hole Plug as the Dome Topper, you just have to use a step down bit to widen the hole to around 1/2″. A little sanding may be required. A bit of paint to match R2s color and just pop it right in!
After the Radar Eye fits with the dome, side panel is bonded together and put onto the Radar Eye and allowed to dry. Tape the side of the Radar Eye and the Side Panel so you don’t get JB Weld on the parts.Watch Full Movie Online Streaming Online and Download
Now that the Side Panel has dried, peel the tape off and attach the side detail made of .030 styrene, with plastic cement and trim off the excess once it dries. The dried cement can also be applied to the seams and trimmed down to make it look like one hole piece.
In order to get the cylinder inside the circle, it needs to be JB Welded on the inside and outside edges of the Radar Eye. I applied tape to the outside of the circle to provide the JB Weld a good backing for filling in the holes and grooves between the cylinder and circle. Once that is all filled in, it dries for 24 hours. Once dry the tape is peeled off and the JB Weld is sanded down to make the eye appear seamless.
Watch movie online The Transporter Refueled (2015)
Once the main body of the Radar Eye is sanded, it needs to be fitted to the dome and make sure it looks as flush as possible.
Watch Part V to see the Side Detail of the Radar Eye.